Anisotropic shrinkage
From Plastics Wiki, free encyclopedia
Revision as of 10:09, 2 December 2010; Sasha (Talk | contribs)
(diff) ←Older revision | Current revision | Newer revision→ (diff)
(diff) ←Older revision | Current revision | Newer revision→ (diff)
Anisotropic shrinkage shrinkage that is not the same in all directions. Occurs in filled material due to the restriction of shrinkage along the fiber length which tends to be in the flow direction.
[edit]
See also
- Anisotropic shrinkage
- Shrinkage allowance
- Sink mark
