Ultra high molecular weight polyethylene

From Plastics Wiki, free encyclopedia

Ultra high molecular weight polyethylene (UHMWPE), also known as high modulus polyethylene (HMPE) or high performance polyethylene (HPPE), is a thermoplastic. It has extremely long chains, with molecular weight numbering in the millions, usually between 3.1 and 5.67 million. The high molecular weight results a very good packing of the chains into the crystal structure. This results in a very tough material, with the highest impact strength of any thermoplastic presently made. It is highly resistant to corrosive chemicals, with exception of oxidizing acids. It has extremely low moisture absorption, very low coefficient of friction, is self lubricating and is highly resistant to abrasion (10 times more resistant to abrasion than Carbon Steel). Its coefficient of friction is significantly lower than nylon and acetal, and is comparable to teflon, but UHMWPE has better abrasion resistance than teflon. It is odorless, tasteless, and nontoxic.

UHMWPE finds use in high modulus fibers (for example, Spectra or Dyneema) for bulletproof vests. Due to its low friction and wear resistance it is used in industrial impact, wear, and sliding applications in both normal and corrosive environment. It is also used in orthopaedic implants (artificial hips, knees).

Structure and properties

UHMWPE is a type of olefin and, despite relatively weak Van der Waals bonds between its molecules, derives ample strength from the length of each individual molecule. It is made up of extremely long chains of polyethylene, which all align in the same direction. Each chain is bonded to the others with so many Van der Waals bonds that the whole can support great tensile loads.

When formed to fibers, the polymer chains can attain a parallel orientation greater than 95% and a level of crystallinity of up to 85%. In contrast, Kevlar derives its strength from strong bonding between relatively short molecules.

The weak bonding between olefin molecules allows local thermal excitations to disrupt the crystalline order of a given chain piece-by-piece, giving it much poorer heat resistance than other high-strength fibers. Its melting point is around 144 or 152 degrees Celsius, and according to DSM, it is not advisable to use UHMWPE fibers at temperatures exceeding 80 to 100°C for long periods of time. It becomes brittle at temperatures below -150°C.

The simple structure of the molecule also gives rise to surface and chemical properties that are rare in high-performance polymers. For example, the polar groups in most polymers easily bond to water. Because olefins have no such groups, UHMWPE does not absorb water readily, but it also does not get wet easily, which makes bonding it to other polymers difficult. For the same reasons, skin does not interact with it strongly, making the UHMWPE fiber surface feel slippery. Similarly, aromatic polymers are often susceptible to aromatic solvents due to aromatic stacking interactions, an effect aliphatic polymers like Dyneema are also immune to. Since Dyneema does not contain chemical groups (such as esters, amides or hydroxylic groups) that are susceptible to attack from aggressive agents, it is very resistant to water, moisture, most chemicals, UV radiation, and micro-organisms.

Under tensile load, UHMWPE will deform continually as long as the stress is present - an effect called creep.

Production

UHMWPE is synthesized from monomers of ethylene, which are bonded together to form what is called ultra high molecular weight polyethylene (or UHMWPE). These are molecules of polyethylene which are several orders of magnitude longer than familiar, high density polyethylene due to a synthesis process based on metallocene catalysts. HDPE molecules generally have between 700 and 1,800 monomer units per molecule, while UHMWPE molecules tend to have 100,000 to 250,000 monomers each. The material is also known as high modulus polyethylene (HMPE) or high performance polyethylene (HPPE). The polymers are aligned randomly when they are produced. To make fibers like Dyneema, they are dissolved and drawn into fibers as the solvent evaporates, causing the polymer chains to orient in the direction of the fiber.

The production of UHMWPE demands relatively little energy and uses no aggressive chemicals. The product can easily be recycled, so environmental pollution from product and process is minimal.

See also

• Dyneema