Hydraulic clamping unit
From Plastics Wiki, free encyclopedia
Hydraulic clamps are used on higher-tonnage injection molding machines, typically in the range 1300 to 8900 kN (150 to 1000 tons). These units are also more flexible than toggle clamps in terms of setting the tonnage at given positions during the stroke.
Hydraulic Clamping System is using the direct hydraulic clamp of which the tolerance is still and below 1 %, of course, better than the toggle system. In addition, the Low Pressure Protection Device is higher than the toggle system for 10 times so that the protection for the precision and expensive mold is very good. The clamping force is focus on the central for evenly distribution that can make the adjustment of the mold flatness in automatically.
See also
Process: Injection molding cycle Reaction injection molding, Reinforced reaction injection molding, Liquid injection molding, Gas-assist injection molding, Coinjection molding, 2-shot injection molding, Fusible core injection molding, Rapid injection molding, Micro injection molding
Equipment: Injection molding machine(Vertical, Horizontal), Injection molding press, Injection mold (Hot runner, Cold runner), Injection unit (Injection ram, Injection screw), Clamping unit (Toggle , Hydraulic, Hydromechanical), Plunger injection molding, Injection molding machine manufacturers, Types of injection molding machines
Terms: Injection pressure, Injection rate, Clamping pressure
See also: Plastic thermoforming • Blow molding • Plastic welding • Plastic extrusion • Rotational molding
